Accessories

Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The Park Tool TW-5.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). With a range of 2-14Nm, the TW-5.2 is designed for the lower torque settings that a shop or consumer would use for proper seat post, seat clamp and handlebar / stem applications. Comes with its own protective case.

Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 23mm size fits Shimano 15mm through-axle hubs. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

The Back-Roller City is an economical starter version with clear features and plenty of space for bike touring. With its symmetrical design and slanted shape on both sides, this classic Ortlieb bag provides enough space for pedaling, while also allowing individual use on either the left or right side of the bike. The patented Ortlieb QL1 system allows fast and easy single-handed mounting and removal of the panniers, and is suitable for racks with a tube diameter up to 16 mm (hook inserts for diameters of 8 and 11mm are included). -Sold as a pair

Made of durable polyester fabric and long known as an ideal pannier for extended tours in any kind of weather, the spacious Bike Packer Classic is now available with the QL2.1 rack mounting system. The advantage of this faithful companion at your rear wheel: greater transport comfort, stability and safety. - Panniers (pair) with classic lid closure for large packing volume - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

The perfect pair of bags for any adventure: you'll be astonished at how much gear fits in the Ortlieb Bike-Packer Plus! The classic flap closure is easy to operate and provides a maximum of stowage on top. The waterproof, three dimensional front compartment offers additional space for many of the small items you may need to access quickly while en route. The durable, high-quality Cordura fabric provides optimal protection against water, dust and abrasion. Thanks to the proven QL2.1 system with self-closing hooks, attaching the Bike-Packer Plus to your bike rack and removing it again is a matter of seconds. All of these features allow you to devote your attention to your tour and the beautiful sights to see along the way, no matter what the weather! - Pannier pair with lid closure and large packing volume - PU-laminated Cordura - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

Many e-bike owners are well-acquainted with this problem: bags and baskets that can't be attached to the handlebar because the e-bike display is in the middle of the handlebar. The ORTLIEB E-Bike Mounting Set comes to your assistance without forcing you to relocate the display. The lockable adapter is mounted to the handlebars with the proven cable fastener. This gives you a theft-proof way of attaching your ORTLIEB handlebar bags and baskets despite the display. The fastener is made for attachments of up to 5 kg. - suitable for all handlebar diameters up to 35 mm - duplicate set of keys - mount compatible with products by Rixen&Kaul (KLICKfix System) - bags can be locked to the handlebar with the integrated lock - additional safety in traffic thanks to the reflective material on the mount block

Bikepacking is also about embracing minimalism. You head off on your bike into the great outdoors, away from it all for an extended period. The amount of gear you can take is limited! The ORTLIEB Frame-Pack allows you to exploit your bike frame to create valuable stowage. Thanks to its lower center of gravity below your top tube, the Frame-Pack makes for an ideal stowage location for heavy gear such as tools, camping stoves, and food supplies. The proven, waterproof nylon fabric and the waterproof zipper ensure that your things remain absolutely dry even in the most inclement weather. Mounting the Frame-Pack with the ultra-strong Velcro straps to the top tube, seat tube, and down tube is a snap. The Frame-Pack is available in a 4-liter size and a 6-liter size – depending on the size of your bike frame.

Mounting set with cable fixing for ORTLIEB handlebar bags and baskets. - Ideal for use with second bike - Reflective tape on front - Universal cord mounting - Holder compatible with bags and baskets of other brands - Attention: not suitable for carbon handlebars

The waterproof ORTLIEB Handlebar-Pack is an indispensable item when you’re on a bikepacking tour in the great outdoors. This Handlebar-Pack offers a payload of either 15 liters for your sleeping bag and pad. It also helps to secure a balanced distribution of gear and weight across your bike. Thanks to the roll closures at both ends, you can always gain quick access to your gear. Compression belts on the outside enable the stowing and attachment of additional equipment. Moreover, the Handlebar-Pack comes with four hooks to enable the attachment of an ORTLIEB Accessory-Pack for additional storage space. Consisting of spacers and two strong Velcro straps, the mounting system ensures secure attachment to any handlebar type, including carbon handlebars. The pack’s stiffened interior and head-tube attachment offer additional stability – in any terrain. FURTHER FEATURES: - Hooks for attaching an ORTLIEB Accessory-Pack - Also suitable for carbon handlebars - Mounting straps with convenient Velcro closures - Lightweight design - High luminosity 3M Scotchlite reflectors

For all Office-Bag, Back-Roller and Sport-Roller models with Stealth buckles. Need to replace a pair of buckles? DETAILS: - 2 plastic Stealth buckles (25mm, black)

Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the ORTLIEB Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 8 to 16.5 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you’re out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike, or an electric mountain bike. Thanks to its elastic drawstrings on the top, the 16.5-liter model offers additional space for items you need to be able to access quickly. This model needs only 15 centimeters of space on your seat stem. FURTHER FEATURES: - Reinforced fabric at all points of contact to the seat - Vertical daisy chain for rear light - Also suitable for carbon seat stems - Lightweight design - Four 3M Scotchlite reflectors available for full extension

The Sport-Roller City is a streamlined economy version of the Sport-Roller Classic. The waterproof panniers for lowrider racks are also perfectly suitable as rear panniers for children’s and youth bikes because of their reduced size. The Ortlieb Quick-Lock1 system allows fast and easy single-handed mounting and removal of the panniers, and is suitable for racks with tube diameters up to 16mm. - Hook inserts for diameters of 8mm and 11mm are included -Sold as a pair

NEW: MOUNT NOT INCLUDED From January 2022 onward you must choose the handlebar mount that is right for your bike. Up until now we have supplied handlebar bags together with our standard bracket, but now you can order your individual mounting set separately so you can choose a mounting system that suits your needs. The waterproof Ultimate Six Plus handlebar bag is the perfect place to stow your things while keeping them at the ready whenever you need them. Depending on the model, this durable handlebar bag made of waterproof Cordura fabric has a payload of 5.7 or 8.5 liters, offering you the space you need for items you need to be able to access quickly. The smallest of the Ultimate Six Plus models distinguishes itself in terms of its transparent, user-friendly and rainproof flap compartment with a 21 x 12-cm interior that enables to secure your smartphone, GPS device and roadmap. You can naturally operate your touchscreen device through the transparent cover. The two larger models enable the use of different inserts in case you want to stow any special gear such as your high-performance camera while you’re underway. What all three models have in common is convenience. You can open the flap with a single hand, thanks to its magnetic closure, and closing it again is virtually automatic. The detachable shoulder strap transforms your handlebar bag into a convenient shoulder bag as soon as you reach your destination.. Further features: - Maximum payload: 5 kg - Zippered inside pocket with carabiner for keychains - Air vents in the flap compartment prevent device overheating - Reflector made of high luminosity 3M Scotchlite material on front of bag - Accommodates the attachment of a map case and Safe-it in sizes S to XL

- UV stabilized stretch polyurethane strap - Securely fastens spare tube or gear to your frame - Won't absorb water and mud like a Velcro strap and won't scratch your frame

The included 9 function Multi Tool contains your most used tools and is designed to live inside your stem/steerer tube. Never get stuck without a Multi Tool on a ride ever again. - 2, 2.5, 3, 4, 5, 6, 8mm - T25 Torx - Flat Head Screwdriver - A stripped down version of the EDC tool containing a 9 function multi-tool neatly stored in your steerer tube - Very easy to install without removing your star nut or threading your steerer tube

The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish. PUMP VOLUME A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market. FAST-ON HEAD Firmly push the pump head onto the Presta valve until it bottoms out, then pump. With our fast-on head the valve stem is securely supported so there's no chance of bending, breaking or unseating the valve and no chance of unscrewing your valve core when you remove the pump.- Crafted from 6061-T6 aluminum with a durable textured machined finish. - 2 Sizes: High Volume 100cc & Compact 70cc - 1-1/4 diameter x 10 length for 100c (160g) - 1-1/4 diameter x 7 length for 70cc (135g) - 100cc Pump holds EDC Tool & a 20g CO2 or EDC Tool & the Storage Capsule - 70cc Pump holds EDC Tool (no Storage Capsule) or a 20g CO2 - Fast-On Head (Presta Only) - No threads or locking levers - Integrated CO2 Inflator - Fully Sealed, Weatherproofed Internals - Includes Bottle Cage Mount - Material: 6061-T6 - Weight: 135g - 70cc, 160g - 100cc (without EDC tool system)

- Compatible with 70cc and 100cc pumps - Glass reinforced nylon with stretch polyurethane strap for secure rattle-free storage - Mounts to water bottle bosses

All your trailside tools, always on your bike and instantly accessible The EDC (Everyday Carry) tool contains all your essential trailside tools and can be conveniently stored inside your steerer tube/stem or the EDC Pump for quick and easy access. Add the optional Tubeless Plug Kit to your EDC tool to fix punctures fast. Whether you're going out for a quick lunch ride or setting off on a longer adventure, EDC has all the tools that you need to keep your bike running smoothly and fix any trailside mechanical. NEW FOR 2020 - Easier to remove from your bike, with a lower friction design. - Updated Chain Breaker is easier to use and has a steel body for increased durability - Stronger steel Spoke Keys - Black Multi-Tool - Tubeless plug jabber cover (Small storage capsule) - TOOL FEATURES (20 functions, 130g) - Includes a 10 function Multi-Tool, Tire Lever and Chain Breaker. MULTI TOOL FEATURES (10 functions, 58g) - 2, 2.5, 3, 4, 5, 6, 8mm, T25 Torx. Flat Head Screwdriver. EDC Top Cap Tool - The EDC Tool contains no loose, easy to lose driver bits - Ultra compact and super lightweight. TIRE LEVER/CHAIN BREAKER FEATURES - Tire Lever, Chain Breaker, 0,1,2,3 Spoke Keys, Presta Valve Core Tool, Spare Rotor Bolt CARRIER FEATURES - Spare Quick Link Storage - 12,16, 20g CO2 Cartridge Storage or 2 x Sealed Storage Capsules STORAGE CAPSULE - The V2 EDC tool now comes with a small and a large sealed storage capsule. The new small capsule is used to cover your jabber and preloaded bacon strip keeping it sticky for longer. The small capsule can be used with EDC Threaded options. It also allows you to use the EDC tool and tubeless plug kit inside the small 70cc OneUp pump. The large capsule only fits inside an EDC Threaded setup, EDC Stem or 100cc pump. The small capsule can be installed inside the large capsule for separating items. Storage Capsule Suggested Pack List (not included): Cash ($20 Note), Zip ties, Park TB-2 Emergency Tire Boot, Waterproof matches, Glueless patches. EDC TOOL STORAGE OPTIONS - The EDC Tool was designed to be stored inside your stem/steerer tube or inside the high volume, CNC Aluminum, EDC Pump with integrated CO2 inflator head. Grabbing your EDC tool from the pump is as easy as reaching for your water bottle. COMPATIBILITY - Backwards compatible with all V1 EDC Tool storage options.

To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h

The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable

Following the tried and tested tire-hugging design of our MTB Mudhuggers, the GravelHugger is designed to fit most fork + wheel + tire (up to 50mm wide) combos. To reduce single-use plastic waste, and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Zip ties (sold separately) can be utilized if you'd prefer to fit and leave them on at all times. - Suitable for 700c (Max tire width 42mm) and 650b wheels (Max tire width 50mm), depending on wheel/tire/fork combination - Designed and made in the UK from 100% recycled polypropylene - Includes Helitape and nitrile O-rings - Length: 490mm - Width: 60mm - Weight: 75g

Following the tried and tested rear Mudhugger design, will fit most bike frame seat stays and is designed for tires up to 50mm wide. The Rear GravelHugger is designed to be attached to the bike with zip ties as these afford the most secure way to fitting. However, it can also be attached utilizing hook and loop straps (sold separately), making removing and refitting easier. - Suitable for 700c and 650b wheels, Max tire width 50mm (depending on wheel/tire combination) - Designed and made in the UK from 100% recycled polypropylene - Includes Helitape and zip-ties - Length: 560mm - Width: 55mm - Weight: 200g

Building on the award-winning, tried and tested Rear Mudhugger design, the new MK2 fender has added 3 significant improvements: 1. Now attaches with reusable velcro straps to make fitting and removing a matter of seconds 2. Where the fender 'sits' on the seatstays we have incorporated rubber inserts which aid grip and improves damping 3. A new push fit BB extension piece, to protect the BB area from debris build up. This has been designed to be as thin as possible so that it can be easily trimmed to suit most bike rear triangle designs The MEDIUM version is designed for bikes with a seatstay angle from 34 degrees down to 27 degrees. Can be fitted to 'most' bikes with disc brakes, even with external cables and hoses. - 690mm long x 105mm wide Comes supplied with: - x2 helitape sheets - x4 velcro straps - x2 rubber damping strips - x1 BB extension (230mm long x 80mm wide) - Designed and made in the UK from recycled polypropylene - 280g (w/o fittings)

The new EVO fender was designed around the latest FOX 36 and 38 forks, to avoid the problem of the crown hitting the mudguard at full compression. The Shorty EVO Ziptie fender attaches directly to the fork with the supplied zip-ties. Compatible with most forks other than models with reverse arch. - Total length: 390mm (Rr extension 255mm, Fr extension 105mm) - More mud clearance - No more crown fouling at full compression - Designed and made in the UK from recycled PP - Strong enough for DH racing at the highest level - 100g

- Incredible water dispersing action to protect, preserve and freshen your bike - Perfect all-over after wash corrosion inhibitor - Drives out moisture and leaves a sparkling non-sticky protective layer on your frame, drivetrain, metal parts and paintworks. - Ideal before applying chain lube - Contains P.T.F.E. - P.T.F.E. to prevent dirt adhesion between washes and reduces future maintenance time as well as helping reduce friction - Do not apply on tire and braking surfaces - HazMat item not eligible for air shipment

- Highly efficient carbon fiber assembly compound designed to prevent over-tightening and create a secure coupling between surfaces - Carbon Gripper creates friction between carbon fiber clamping areas and lowers clamping torque without causing fatigue or internal fractures or shortening component life

- Fast and effective grease-cutting formula - Removes all chain oil and wax residue - Safely eliminates drive chain contaminants - Biodegradable - Ideal for use with chain cleaning devices - Safe for metal, plastic, rubber and seals

- Highly versatile dry weather chain lubricant - Deep penetrating, durable P.T.F.E. chain lubricant - Hold up to extreme conditions which can destroy ordinary lubes - Comfort bottle with pipette system for ease of use and application

- New high-pressure turbo spray - Easily cuts through tough grease in seconds - No rinse, heavy duty formula - Can be used on chains, gears and individual components - Works on tough waterproof grease and chain wax

- Incredibly effective cleaning formula containing Nano Technology that also cares for your bike's delicate finishes - Contains no harmful acids, CFC's or solvents and is fully biodegradable - Cuts through dirt, oil and grime quickly and safely leaving your whole bike sparkling clean

- Fast action bike cleaner - Readily biodegradable ingredients - Reduced carbon footprint with 94% less packaging - 100% plastic free packaging, 100% water free, 100% environmentally friendly ingredients, including plant based raw materials - Supplied in a compostable sachet and printed with vegetable inks - FSC recycled card box - Re-fill your old bottle and help reduce plastic waste - Dissolves easily in any type of water. Cold, warm and hot. Hard or soft - Safe to use all over the bike - Alkaline based and free from alcohol, CFCs, (EDTA), solvents or acids - Vegan & vegetarian friendly - -01: 4 sachets, 30g each - -02: Power Bundle: 4 sachets, 1x aluminum bottle, 1x bike clener spray trigger, 1x Silicon base for aluminum bottle

The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter

Fast-acting, all-purpose cleaner designed to remove mud, dirt, and debris from matte finishes. Specially blended surfactants and detergents lift away solids without sticking to the surface, leaving the surface clean and residue-free. Non-toxic, non-flammable, and eco-friendly formulation contains no VOCs, harmful acids, CFC’s or solvents and is 50 state VOC compliant. For use as a professional strength cleaner for matte finishes. Safe for use on all matte surfaces, from equipment to accessories. Features: - Cleans and protects matte finishes. - Adds no gloss or shine. - Removes dirt, dust, road grime, fingerprints, and more. - 100% biodegradable. - Contains no VOC's, harmful acids, CFC's or solvents. - Non-flammable.

MJ-902S Equipped with high efficiency, high transmittance optical lenses, producing the perfect beam pattern for your nightly adventures. Can be connected to E-Bike power systems with cable (sold separately). - Lumen: 3000 - Battery: 7.2V 7000mAh - Waterproof: IPX 6 - Runtime: 1.5-42 H - Application: Bike and E-Bike

Helmet mount for Allty 1000 /2000 and Monteer 6500 bicycle front lights. Mount base and 2 nylon helmet straps are included, 60 degrees adjustable angle. Made with high quality materials, these durable mounts should be compatible with most vented helmet. For compatibility with 900/902/906 bike lights, a Garmin adapter is required.

The MAGICSHINE Monteer 3500S offers up to 3500 lumens of max output as an MTB headlight. With smaller head and lightweight design, it is a good choice for various off-road ride, as a handlebar or helmet light. - Lumen: 3500 - Battery: 5,200mAh - Charging Time: 2.5-3 Hours - Waterproof: IPX 5 - Runtime: 1.5-75 Hours

SEEMEE 180 is a powerful bicycle tail light with convenient USB recharge. - The max output can be reached up to 180 lumens - Smart motion and ambient light sensor give you enhancing using experience.  - EFFICIENT LIGHT OUTPUT-- Compares to red cover, transparent optical fiber emits stronger and uniform light outputs while consuming less energy. - HIGH VISIBILITY-- SEEMEE 180 allows riders to be seen from up to 2000m, distinguishes you  from the traffic effectively. - SMART MOTION SENSOR-- The motion sensor turns on automatically when braking, and lights on for 3 seconds at maximum 180LM. - SENSITIVE AMBIENT LIGHT SENSOR-- Under smart mode, the built-in light sensor automatically adjusts the brightness according to ambient lighting conditions, thus to increase warning effect efficiently during day and night. - LOW POWER MODE-- When battery level is lower than 5%, SEEMEE 180 automatically changes to economic flashing mode(27LM), which can run up to 20 minutes before it totally powers off, this feature ideally extends the burning time. - ALL AROUND VISIBILITY-- The translucent hard case gives SEEMEE 180 high side visibility, which lets riders to be seen from all directions. - SMART BATTERY INDICATOR-- At standby mode, click the power button to activate battery indicator for 3s. - EASY TO MOUNT-- With the versatile mounting strap, SEEMEE 180 is easy to be mounted under saddle or different seat posts. - IPX6 WATERPROOF RATE-- SEEMEE 180 is fully sealed, and can resist water from any directions. - EASY TO OPERATE-- Double click to change the mode, short click to cycle through brightness settings, memory function for quick start.

SEEMEE 20 is a lightweight Micro-USB rechargeable tail light. Its high powered COB red LED light source producing a max output of 20 lumens, and is capable of 180° of visibility.

SEEMEE 60 is a bike taillight with high powered COB red LED light source, the max output is 60 lumens, and is capable of 180 degrees of visibility   - SMART BRAKE SENSOR LED BIKE REAR LIGHT--Built in sensor will activate the brake light feature when it detects a sudden change in motion pattern, and blinks in a series of super fast flashes at 60 lumens. If no vibration is detected in 60 seconds, SEEMEE60 enters into a dormant mode to save energy and is re-activated upon any movements. - USB RECHARGEABLE BIKE BRAKE LIGHT-- It is rechargeable via Micro USB. A full charge will take 1.5 to 2 hours under 5V/500mA, Charging light will turn from red to green indicating its built in Lithium battery has been fully recharged. - QUICK INSTAILL--Installation and removal of the taillight is super quick and easy, rotate 90 degrees to install and rotate 90 degrees back to remove. - WATERPROOF OF IPX6--Anodized aluminum surface crafted seamlessly around the red led surface allows the SEEMEE60 to be completely waterproof with an IPX6 rating. - MULTIPLE MODES--3 brightness levels, a constant mode and 2 flash modes can be used in any combo. - Size: 41x33x23mm. - Weight: 34g.

Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.

Lezyne's easy-to-use Alloy Drive CO2 is super-compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with all threaded cartridges. - CNC-machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges (sold separately)

Beautifully crafted cycling bottle cage made from an extremely durable Composite Matrix material. It’s engineered and tested to securely hold bicycle water bottles while still offering left and right side-loading action. Weighing only 36 grams, its one-piece design is very lightweight and minimalistic. Compatible with all bicycle frames with standard bottle cage mounts, it performs flawlessly across all forms of riding—from gravel grinding to mountain biking to road racing. - Ergonomic, easy-loading design - Stylish, modern look - 36g lightweight composite matrix

Lezyne's Micro Floor Drive HP is a powerful mini-pump that thinks it's a floor pump. Its fold-out foot peg and aluminum construction make it easier than ever to pump up to a maximum pressure of 160 psi. You'll appreciate the ergonomic handle, extra-long hose and Presta/Schrader-valve compatibility. A frame mount and Speed Chuck is included, too.

Lezyne's lightweight, powerful Sport Drive HV mini-pump quickly inflates your mountain bike tires so you can get back ro pedaling. Its oversize aluminum barrel and no-slip Composite Matrix handle help you get pumped up to 90 psi in a flash. And making your inflation experience even easier is a Presta/Schrader-compatible hose that stows inside the handle when not in use.

Lock your bike's quick-release components with Kryptonite's 4-foot long Keeper 512 Combination Cable. It's a 5mm braided steel cable that offers increased cut resistance and features a pre-set combination closure. The vinyl coating protects bikes and equipment from scratches, too.

- 7mm four-sided chain links made from 3t manganese steel - Patent-pending end link design secures chain to hardened deadbolt eliminating critical vulnerability - Hardened deadbolt design provides extra holding power - High security disc-style cylinder is pick and drill resistant - Includes 2 new ergonomic “I” keys - Durable weather-resistant nylon sleeve prevents scratches - Key Safe Program - Product dimensions: 47.3” (120cm) chain length - Product weight: 3.75 lbs (1.70 kgs)

Kryptonite's Keeper 785 Integrated Chain features a 7mm-thick, four-sided link chain perfect for use in low- to moderate-risk locations. The triple heat-treated manganese steel chain has a durable nylon cover to protect your bike from scratches. Plus, it uses an integrated hardened deadbolt that is pick and drill resistant, and it thwarts most leverage attacks as well.

- 12mm hardened performance steel shackle - New hardened double deadbolt design with anti-rotation to resist against twist attacks - Disc style cylinder with center keyway - Includes side-mount snap-in bracket - Includes 4' flex cable for securing front wheel or other accessories - Includes 2 stainless steel keys with an ergonomic design to reduce torque and keep them from bending or breaking - Key Safe Program - Product dimensions: 4” x 8” (10.2cm x 20.3cm) - Product weight: 2.40 lbs (1.09 kgs)

SPECIFICATIONS & FEATURES - 10mm, flexible BRAIDED STEEL CABLE provides increased cut resistance - ADVANCED CYLINDER provides greater protection from picking - EASY-CLICK locking - no need for keys when locking up - Dual sliding cylinder WEATHER GUARDS with automatic close feature - 2 EASY-TO-USE REVERSIBLE KEYS - Key Safe Program - Product dimensions: 3/8” (10mm) cable diameter 5’ (150cm) cable length - Product weight: 0.95 lbs (0.43 kgs)

- Easy-Click Locking - Ergonomic dials for ease of use - New easy to use reset design - Included bracket to easily carry on a bike (-03, -06)

- Easy-click locking, no need for keys when locking - 2 reversible keys, can be inserted either way - Included bracket to easily carry on a bike (-01, -03, -07) - Coiled and compact for easy transportation (-02, -05, -06)

Kryptonite's KryptoLok Series 2 915 Integrated Chain is a 9mm-thick, four-sided link chain made of triple-heat-treated, boron-manganese steel for serious strength. Its integrated high-security lock cylinder is pick, drill, and cut resistant. This five-foot chain is covered with a weather-resistant nylon sleeve that protects your bike's finish. Plus, the KryptoLok Series 2 has an anti-theft protection offer.

The KryptoFlex 1004 Double Loop Cable is a 3/8-inch braided steel cable providing increased cut resistance. The double loops are for use with U-locks, disc locks and padlocks. The vinyl coating protects bikes and equipment from scratches. It includes the Hook-n-Loop strap for easy carrying. The KryptoFlex 1004 Looped Cable is 3/8-inch x 4-feet.

The KryptoFlex 1007 Double Loop Cable is a 3/8-inch braided steel cable providing increased cut resistance. The double loops are for use with U-locks, disc locks and padlocks (sold separately). The vinyl coating protects bikes and equipment from scratches. It includes the Hook-n-Loop strap for easy carrying. The KryptoFlex 1007 Looped Cable is 3/8-inch x 7-feet.

Keep your stuff safe with Kryptonite's Laminated Steel Padlock. It sports a double deadbolt locking mechanism and a hardened steel shackle for serious strength and protection.

Big cities call for big protection, and Kryptonite's New York Chain delivers with 12mm six-sided chain links made from hardened manganese steel. Wrap this burly lock around your frame worry-free thanks to the durable nylon cover that protects your bike's paint from scratches. Leave with peace of mind knowing the 14mm hardened Max-Performance steel shackle mated to the Evolution Series 4 Disc Lock is on duty. With a double deadbolt design to protect against twist attacks, would-be thieves with an eye on your bike don't stand a chance. It includes three stainless steel keys--one of which is lighted for night access!

- New hardened deadbolt anti-rotation design - Includes 2 stainless steel keys with an ergonomic design to reduce the amount of torque, and keep them from bending or breaking - Includes side mount, snap-in bracket - Disc-style cylinder with center keyway - Key Safe Program - Product dimensions: 4” x 8” (10.2cm x 20.3cm) - Product weight: 2.05 lbs

- Crank Remover - With patented interchangeable adaptor fits both square & hollow axles. - For use with 8mm hex key wrench.